Run the numbers
All three fields are required. Results update as you type.
What this calculates
In a multi-tenant building, rent is charged on rentable square footage, not just the four walls of the suite. Rentable area is the suite plus a share of the lobbies, corridors, restrooms, and other common areas that every tenant uses. This tool allocates that common area the standard way, in proportion to each tenant's share of the leasable space.
The formula
First, subtract common area from the total building to get leasable area, the space that can actually be rented. The tenant's suite divided by that leasable area is its pro-rata factor. Multiply the factor by the common area, and you have the tenant's share of it. Add that to the suite and you have total rentable SF.
A worked example
An 18,000 SF building with 1,500 SF of common area and a 2,808 SF suite:
| Leasable area | 18,000 − 1,500 = 16,500 SF |
|---|---|
| Pro-rata factor | 2,808 ÷ 16,500 = 17.0182% |
| Common area share | 17.0182% of 1,500 = 255.27 SF |
| Total tenant SF | 2,808 + 255.27 = 3,063.27 SF |
The 255.27 SF is the common area allocation. Expressed as a ratio against the suite it becomes the load factor, 3,063.27 ÷ 2,808 = 1.0909, or about 9.09 percent added on top. At $2.50 per SF per month, billing 3,063 SF instead of 2,808 SF adds about $638 to monthly base rent, roughly $7,700 a year.
Pro-rata factor, load factor, core factor, loss factor
These get used loosely and they are not interchangeable. Two of them answer different questions, and the last two are the same answer with different denominators.
| Pro-rata factor | Suite ÷ leasable area, here 17.0182%. The tenant's share of the building. This is what allocates common area and divides up CAM, taxes, and insurance. |
|---|---|
| Load factor | Rentable ÷ usable, here 1.0909 (9.09%). The markup on this one suite. Also called the core factor or add-on factor. |
| Loss factor | The same gap divided by rentable instead of usable, here 8.33%. Quoted this way in some office markets, New York especially. |
Pro-rata looks outward at the building. Load factor looks inward at the suite. One is a share of the whole, the other a markup on the part, so a 17 percent pro-rata share and a 9 percent load factor can describe the very same lease without contradiction.
Because this calculator allocates common area strictly in proportion, the pro-rata factor is also the tenant's share of the total building: 3,063.27 ÷ 18,000 is 17.0182% as well. That holds by arithmetic, not by coincidence.
One caution. If a landlord quotes a core factor or a loss factor, ask which denominator produced it. The same suite above is a 9.09 percent load and an 8.33 percent loss. Same space, same rent, different-sounding number.
Why it matters when you compare quotes
Two buildings can quote the same rate per square foot and still cost different amounts, because they load common area differently. A 10 percent load factor and an 18 percent load factor on the same headline rate are not the same price. Before comparing rates, ask each landlord for the suite's usable SF, the rentable SF they are billing, and how rentable area was measured.
- The lease controls, not the arithmetic. Some leases fix rentable SF as a stated number, some define a measurement standard such as BOMA, and some allow remeasurement. Read the definition before you rely on a calculation.
- Common area is not always allocated building wide. Centers with separate buildings, floors, or phases sometimes allocate by a smaller pool, which changes the factor.
- This is square footage, not CAM expense. The result tells you the SF rent is charged on. What the tenant pays toward common area operating costs is a separate reconciliation driven by the lease structure.
For the structures those costs sit inside, NNN through full service, see our guide to commercial lease structures. If you want a specific quote checked, send us the numbers and we will walk through it.
This calculator is provided for general estimating purposes. Actual rentable square footage is governed by the lease and the measurement standard it adopts. Confirm all figures with the landlord and your own advisors before signing.
Looking for Space?
Tell us the use, the square footage you need, and when you want to open. We will tell you honestly whether either center fits.
Ask About Space